Why chimney relining is so important?

For home heating used different fuels: diesel fuel, wood, coal, gas. Hiring fireplace contractor is important. Its combustion causes many problems to chimneys. The fuels contain a mixture of acids which condensate falls on the bricks of chimney wall and destroys them. The solution for this disaster is chimney relining – inserting the acid resistant material in the chimney cavity. It’s the most common material is made of stainless steel.

Chimney and fireplace

At present, for some reason, builders and architects often don’t give the importance to the engineering of some structures of the building, namely chimneys. For their masonry, mostly cavity used, sometimes silicate bricks. The quality of the chimney masonry is often bad and in such cases, only relining of chimney hollow can remedy the situation.

Our chimney specialists are often faced with a situation where the cavity is too narrow, so inserting the liner inside of it can be very tough considering that the metal expands when heated, so there must be gaps between. If they are not - a metal sleeve will be deformed or cracked.

Sometimes, in this case, the problem can be solved by inserting in the flexible sleeve.

Employees of gas service when connecting gas pay attention only to their pockets and the cleanout of ventilation’s hatch. They don’t care about the chimney material, or separations channels or condensate openings. After some time, the wrong chimney owners have to deal with the different problems due to improper design and unsuitable materials.

Fixing the problem

The steel pipe has a circular shape and it’s significantly smoother (as compared with a brick chimney) inner surface. This provides better traction, the minimal formation of soot and condensation. And cleaning the steel pipe is much easier. Furthermore, it’s always possible to choose an optimum diameter of the sleeve.

Chimney relining

Chimney relining columbia md is the salvation for channels with poor brickwork. Insert the liner and warming of the channel prevent condensation and precipitation, and as a consequence, their destruction.

The used relining pipes should be made of high-quality stainless steel. Undoubtedly, it’s better once to pay full attention to the chimney and make investments once than to engage yourself in patching up the holes every year. For houses that use gaseous fuels, pipes must be made of acid-proof stainless steel materials otherwise, they will not last long.

Our chimney employees will investigate the problem, give the recommendations and perform chimney relining according to your needs.

Leave a reply